The carbide wire drawing die (tungsten steel die) uses high-quality cemented carbide as the mold core, with high hardness, good thermal conductivity, and low friction coefficient.
Product Description
Tungsten Carbide wire drawing dies are characterized by their simple fabrication, corrosion resistance, strong impact resistance, and low cost. They are suitable for drawing ferrous metals, large size wire rods, and applications with poor wire drawing conditions.
Grade use
Carbide drawing dies are widely used for wire drawing. Wire drawing is a manufacturing process used to reduce or change the cross-section of a wire by using a series of drawing plates or dies.
Grade
g/cm³
MPa
HRA
Application
YG6X
14.95
1800
91.5
It is suitable for making drawing dies with inner hole less than ¢6.00mm.
YG6
14.95
1900
90.5
It is used to make drawing dies for drawing non-ferrous metal round rods with inner holes less than ¢20.00mm and pipes with inner holes less than ¢10.00mm.
YG8
14.8
2200
89.5
Drawing dies for making drawn steel and non-ferrous metal round rods and pipes.
YG10
14.5
2400
88.5
YG15
14
2800
87
It is used to make steel rods and pipes with high shrinkage rate.