Product Parameters

Working principle and equipment composition:

1. This machine uses ultrasonic high-speed vibration to produce continuous impact vibration on the surface of the cleaned mold through the steel needle, so as to achieve the purpose of cleaning the inner hole of the mold (in the ultrasonic cleaning process, the cleaned mold must be placed in water to complete the cleaning process).

2. This machine is mainly composed of ultrasonic generator, transducer and base.

1) Ultrasonic generator: The ultrasonic generator is installed in a cabinet, which is an ultrasonic power supply, and adopts automatic frequency tracking circuit to achieve the best ultrasonic output and vibration effect.

2) Transducer: The transducer is a high-efficiency piezoelectric ceramic transducer, which can convert ultrasonic wave into stable ultrasonic vibration.

3) Machine base: there is a support plate on the column of the machine base that can be adjusted up and down, and the transducer is installed on this support plate.

Installation:

Place the base on a stable desktop, move the transducer up and down to the appropriate position, and then lock it. Connect the ultrasonic generator with the transducer with the output line provided with the machine, and then insert the power plug on the base into the power output socket of the ultrasonic generator. After checking the connection, Insert the ultrasonic generator power plug into the power socket with reliable grounding when the equipment switch is closed.

Scope of application

It is suitable for cleaning the wire drawing die and tin-plating die products of various materials such as natural diamond, polycrystalline diamond, artificial diamond, hard alloy (tungsten steel) with an inner hole diameter of 0.01-15.00mm.